Applying Wall Stickers
1)
Unroll the wall sticker onto a flat surface and leave it to settle for an hour. Using your squeegee or a credit card, with the sticker facing up, go over sticker to help the application paper stick to the sticker.2)
Clean the wall or window which you will be applying the wall sticker to. This will ensure that it is free from dirt and grease.3)
Position the sticker onto the wall and secure the top third of the sticker to the wall using masking tape. Check that the sticker is positioned exactly as you want it, because it cannot be re-positioned after applying.4)
Starting at the bottom, peel the application paper away from the backing paper. Do not touch the actual sticker.5)
Cut off the exposed backing paper.6)
Using your squeegee or a credit card, stick down the application paper and sticker which was separated from the backing paper. Work from the centre and start at the top, push out any air bubbles.7)
Now remove the masking tape and remaining backing paper from the top of the design.8)
In a similar way to the bottom half, squeegee over the top half so that the sticker is fully stuck to the wall. Spend time pressing the sticker firmly onto the wall.9)
Now carefully peel off the application paper, using the squeegee on any bits which aren’t fully stuck to the wall. Remove and bubbles by pricking them with a pin and pressing the air out with your fingers.